Filter
Top Products
Reference Manual
00809-0100-4021, Rev DA
November 2004
A-3
Rosemount 3144P
External Ground Screw Assembly
The external ground screw assembly can be ordered by specifying code G1
when an enclosure is specified. However, some approvals include the ground
screw assembly in the transmitter shipment, hence it is not necessary to order
code G1. The table below identifies which approval options include the
external ground screw assembly.
Hardware Tag
• No charge
• 2 lines of 28 characters (56 characters total)
• Tags are stainless steel
• Permanently attached to transmitter
• Character height is
1
/16-in. (1.6mm)
• A wire-on tag is available upon request. 5 lines of 12 characters (60
characters total)
Software Tag
• HART transmitter can store up to 8 characters. F
OUNDATION fieldbus
transmitters can store up to 32 characters.
• Can be ordered with different software and hardware tags.
• If no software tag characters are specified, the first 8 characters of the
hardware tag are the default.
Approval Type External Ground Screw Assembly Included
(1)
(1) Code G1 is also included with Integral Protector option code T1 and does not need to be ordered
separately.
NA, E5, K5, K6, KB No–Order option code G1
N1, E1, I1, ND, K1, E7, N7, I7, K7, KA, I2, E4 Yes