Filter
Top Products
For PBX or Centrex systems that require a dial-out code to make calls
outside the PBX or Centrex system, include the dial-out code followed by
one or more pauses (if available) on an Auto Dial button for a number
outside the PBX or Centrex system. (See “Changing Settings to Support
PBX or Centrex Services” in Chapter 2 for more information.)
Examples
The examples below show some possible entries for an Auto Dial number in
Step 4 of “Programming.”
■
■
■
■
Outside Phone Number. Enter the phone number (up to 28 digits) exactly
as you would dial it. For example, to program 555-2398, press [
5
] [
5
] [
5
] [
2
]
[
3
] [
9
] [
8
].
Extension Number. Press the left [ Intercom ] button and enter the two-digit
extension number. Press [
★ ] before the extension number to program the
Auto Dial button to voice signal an extension. For example, to program
extension 20 for voice signaling, press left [
Intercom
] [
★
] [
2
] [
0
]. The display
reads:
Intercom *20
Feature Code. Enter the appropriate code. For example, to program a
button to turn on the message light at extension 20, press [
Feature
] [
0
] [
9
] [
2
]
[ 0 ]. When you press the programmed button, the Message Light at
extension 20 turns on.
Programming
To program an Auto Dial button:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
Central Program
].
2.
Enter the number of the extension to be programmed.
3.
Press a programmable button.
4. Enter an outside phone number, feature code, account code, or PBX/Centrex
feature access code; or press left [
Intercom
] and enter an extension number.
5.
Repeat Steps 3 and 4 to program additional Auto Dial buttons, or exit
programming mode.
Auto Dialing
5-15