Filter
Top Products
Programming
To program a VMS Cover button:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
Central Tel Program
].
2.
Enter the number of the extension to be programmed with this feature.
3.
Press a programmable button with lights.
4. Press [
Feature
] [
1
] [
5
].
5.
Program another button for this extension or exit programming mode.
Using
From a system phone, press the programmed button to turn VMS Cover on;
press it again to turn it off. Use the button like a switch—when the light is on,
VMS Cover is on and your unanswered intercom and transferred calls or outside
calls on lines assigned ownership go to your voice mailbox after the specified
number of VMS Cover Rings.
If you turn on VMS Cover while a call is ringing, the call is sent immediately to
your voice mailbox.
If VMS Cover is already on and a call begins to ring, you can turn on Do Not
Disturb to send that call and any subsequent calls immediately to your voice
mailbox.
5-196
VMS Cover (F15)