Lucent Technologies 4.1 Marine Radio User Manual


 
System Time (#103)
Description
This System Programming procedure sets the time that appears on system
display phones.
Considerations
Enter the time in 24-hour notation. In this scheme, the hours of the day are
0000 (12 midnight) to 2359 (11:59 p.m.). Since each time must have four
digits, use leading zeros when necessary. For example, to set the time to
9:00 a.m., enter [
0
] [
9
] [
0
] [
0
]. For 4:45 p.m., enter [
1
] [
6
] [
4
] [
5
].
The time appears on system display phones as a.m. or p.m. (not in 24-hour
notation).
Programming
To change the System Time:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
1
] [
0
] [
3
].
2.
Enter a new time in 24-hour notation. For example, to set the time to 2:15
p.m., press [
1 ] [ 4 ] [ 1 ] [ 5 ]. A display similar to the following appears:
System Time
Data 1415
This time appears on system display phones as 2:15p.
3.
Select another procedure or exit programming mode.
System Time (#103)
5-185