Filter
Top Products
SMDR Record Type (#608)
Description
Call reporting (often referred to as Station Message Detail Recording or SMDR)
provides detailed tracking of telephone usage in a printed report. This System
Programming procedure allows you to specify whether all calls or outgoing calls
only are to be included on call reports.
Related Features
■
The date and time that appear on call reports are determined by System
Date (#101)
and
System Time (#103).
■
The call report page header prints in the Display Language (#303)
specified for extension 10.
■
If Account Code Entry (optional or forced) is used to enter an account
code for a call (for example, to charge calls to specific departments or
projects), the account code prints on the call report. If there are entries in
the Forced Account Code List (#409), only valid account codes and any
other entered digits up to 16 print on the call report.
■
Marked System Speed Dial Numbers appear on the call report as Fnnn,
where nnn is the Speed Dial code.
■
If you use Automatic System Answer or Direct Extension Dial, you may
want to set SMDR Talk Time (#611) to Active to print on call reports the time
a user spends on an incoming outside call—from the time the user answers
the call to the time the call is disconnected from the system.
■
You can use SMDR Output Format (#610) to identify whether a maximum of
15 digits or 24 digits is printed for dialed numbers on the call report.
■ For instructions on notifying the system that the printer has been aligned to
the top of a new page, see SMDR Top Of Page (#609).
■
If you use Caller ID, SMDR reports include the telephone numbers of
incoming calls.
Considerations
This feature requires special hardware and/or software. For more information,
see “Call Reporting Devices (SMDR)” in Chapter 4.
Valid Entries
1 = All Calls (outgoing and incoming) ✔
2 = Outgoing Only
Programming
To identify the type of calls to include for call reporting:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
6
] [
0
] [
8
].
2.
Press [
Next Data
] until the appropriate value displays.
3. Select another procedure or exit programming mode.
5-170
SMDR Record Type (#608)