Filter
Top Products
4. At this point:
■ If you want to assign the pool to the first available button with lights,
press [
Next Data
] until a display similar to the following appears:
Pool Ext Assign 15 P881
1 Assigned
■
If you want to remove a pool assignment, press [
Next Data
] until a display
similar to the following appears:
Pool Ext Assign 15 P881
2 Not Assigned
■
For auxiliary pools only, if you want to assign the pool to a specific
button, press [
3 ]. A display similar to the following appears:
Pool Ext Assign 15 P881
3 Select a Button
Then press a button with lights to assign the auxiliary pool to that button.
If you use option 3 after an auxiliary pool has been assigned, the
auxiliary pool moves from the old button to the new button you select.
5.
At this point:
■
To assign another pool for this extension, press [
Next Item
] or [
Prev Item
]
until the pool access code shows on the display. Then repeat Step 4.
■
To program another extension, press [
Next Procedure
] [
Prev Procedure
] and
begin at Step 2.
6. Select another procedure or exit programming mode.
5-156
Pool Extension Assignment (#314)