Filter
Top Products
Programming
To restrict an extension from making calls on a specific line:
1.
2.
3.
4.
5.
6.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
3
] [
0
] [
2
].
At the
Extension:
prompt, enter the number of the extension to be
programmed. For example, to program extension 23, press [ 2 ] [ 3 ].
At the Line: prompt, enter the line number to be restricted at this extension.
For example, to restrict line 2, press [
0
] [
2
].
The current restriction displays.
To change the line restriction for this extension, press [
Next Data
] until the
appropriate value displays—see “Valid Entries” on the previous page.
At this point:
■
To restrict another line at this extension, press [
Next Item
] or [
Prev Item
] until
the line number shows on the display. Then repeat Step 4.
■
To restrict another extension, press [
Next Procedure
] [
Prev Procedure
] and
begin at Step 2.
Select another procedure or exit programming mode.
Line Access Restriction (#302)
5-117