Filter
Top Products
Programming
To program a Call Coverage button:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
Central Tel Program
].
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button, preferably a button with lights.
4.
At this point, you can:
■
■
■
Press [
Feature
] [
2
] [
0
], or
Press [
Feature
] [
2
] [
0
] and the number of the originating extension, or
Press [
Feature
] [
2
] [
0
], the number of the originating extension, and the
number of the covering extension.
5. Program another button for this extension or exit programming mode.
Using
System Phone
To send calls for coverage manually:
1.
Press [
Feature
] [
2
] [
0
].
2.
Dial your extension number.
3. Dial the extension number of the covering extension.
To remove Call Coverage manually:
1.
Press [
Feature
] [
2
] [
0
].
2.
Dial your extension number twice.
To send calls for coverage using the programmed button:
1. Press the programmed button.
If an originating extension and a covering extension were programmed on
the button, Call Coverage is activated (on a button with lights, the green
light is on). Skip Steps 2 and 3.
2. If no originating extension was programmed, dial your extension number.
3. If no covering extension was programmed, dial the extension number of the
covering extension.
Call Coverage is activated (on a button with lights, the green light is on).
To remove Call Coverage using the programmed button:
1. Press the programmed button.
If an originating extension and a covering extension were programmed on
the button, Call Coverage is deactivated (on a button with lights, the green
light is off). Skip Steps 2 and 3.
2.
If no originating extension was programmed, dial your extension number.
3. If no covering extension was programmed, dial your extension number again.
Call Coverage is deactivated (on a button with lights, the green light is off).
5-38
Call Coverage (F20,XX,XX)