Filter
Top Products
Valid Entries
1 = Assigned
2 = Not Assigned ✔
Programming
To change the Voice Interrupt On Busy setting for an extension:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
3
] [
1
] [
2
].
2.
Enter the number of the extension to be programmed with this feature.
3.
To assign or unassign Voice Interrupt On Busy, press [
Next Data
] until the
appropriate value displays.
4.
Select another procedure or exit programming mode.
Using
To initiate a voice interrupt on busy call:
1.
From a system phone, press [
Intercom
].
2.
Press [
★
] plus a two-digit extension number (or use an Auto Dial button).
3.
Listen for one of the following responses:
■
If you hear one beep, you have reached an idle system phone. You
can speak after the beep.
Your voice is heard through the other extension’s speaker. If the recipient
is present, he or she can reply.
■
If you hear two beeps, you have reached a busy system phone with
Voice Interrupt On Busy Assigned. You can speak after the beeps. Be
aware that the third party to whom the recipient is speaking probably
also will hear the two beeps and the faint sound of your voice.
If the recipient has a Voice Interrupt On Busy Talk-Back button, wait for a
response. If you hear a second set of beeps, the recipient has ended the
voice interrupt on busy call. In either case, hang up to end your part of the
voice interrupt on busy call.
■
If you hear ringing, you have reached a standard phone, an idle MDC
9000 or MDW 9000 phone, or a busy system phone with Voice Interrupt
On Busy Not Assigned. Your call is not completed until someone
answers.
Voice Interrupt On Busy (#312) 5-201