Filter
Top Products
4. At this point:
■
■
■
■
■
If you want to assign the line to the first available button with lights,
press [
Next Data
] until a display similar to the following appears:
Line Assignment 15 L01
1 Assigned
If you want to remove a line assignment, press [
Next Data
] until a display
similar to the following appears:
Line Assignment 15 L01
2 Not Assigned
If you want to assign the line to a specific button, press [ 3 ]. A display
similar to the following appears:
Line Assignment 15 L01
3 Select a Button
Then press a button with lights to assign the line to that button. If you use
option 3 after a line has been assigned, the line moves from the old button
to the new button you select.
5.
At this point:
To program another line for this extension, press [
Next Item
] or [
Prev Item
]
until the line number shows on the display. Then repeat Step 4.
To program another extension, press [
Next Procedure
] [
Prev Procedure
] and
begin at Step 2.
6.
Select another procedure or exit programming mode.
Line Assignment (#301)
5-121