Filter
Top Products
Programming
To program a Manual Signaling button:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
Central Tel Program
].
2.
Enter the number of the extension to be programmed with this feature.
3.
Press a programmable button.
4.
Press [
Feature
] [
1
] [
3
].
5.
Dial the two-digit extension number of the target extension. For example, to
identify extension 22 as the target extension, press [
2
] [
2
]. (Enter [
★
] before
the extension number if you want to use the button for voice signaling.)
6.
Program another button for this extension or exit programming mode.
Using
■
■
■
To beep the target extension:
1.
While the handset is in the cradle, press the programmed button.
The extension beeps for as long as the button is pressed.
To ring or voice signal the target extension:
1.
Lift the handset or press [
Spkr
]
2.
Press [
Intercom
].
3. Press the programmed button.
To transfer a call to the target extension:
1.
While active on the call, press [
Transfr
].
2.
Press the programmed button.
Manual Signaling (F13XX or F13*XX)
5-133