Filter
Top Products
Considerations
■
■
An Automatic System Answer button must be programmed on a button with
lights on the system display phone at extension 10. (This feature will not
work if it is programmed on a button without lights.)
Automatic System Answer can handle up to three outside calls
simultaneously.
Valid Entries
1=
2=
3=
Assigned
Not Assigned ✔
Select button (then press a programmable button to assign Automatic
System Answer to that button)
Programming
To assign or unassign an Automatic System Answer button with lights at
extension 10:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
1
] [
1
] [
1
].
2. If you want to assign Automatic System Answer to the first available button,
press [
Next Data
] until a display similar to the following appears:
ASA Button
1 Assigned - Ext10
If you want to unassign Automatic System Answer, press [
Next Data
] until a
display similar to the following appears:
ASA Button
2 Not Assigned
If you want to assign Automatic System Answer to a specific button, press
[
3 ]. A display similar to the following appears:
ASA Button
3 Select a Button
Then press a programmable button with lights to assign Automatic System
Answer to that button.
3.
Select another procedure or exit programming mode.
4.
Label the Automatic System Answer button at extension 10.
5-22
Automatic System Answer Button (#111)