Filter
Top Products
This chapter gives step-by-step instructions, using the following conventions:
■
■
■
Programming instructions tell you to use the [
Next Data
] button to change
values for specific settings. You can, however, enter a value using the
dialpad if you prefer. Similarly, there are different ways to exit
programming mode as described in Chapter 2—use the method with
which you are most comfortable.
For Telephone Programming, this chapter provides only the instructions
for Centralized Telephone Programming. To program from individual
extensions, users should refer to their User Instruction cards.
Display prompts in the chapter are shown as they appear on
PARTNER-model phones. If you are using an MLS-model phone, some of
these prompts may be abbreviated.
All of the instructions in this chapter assume that system phones select outside
lines or pools first and standard phones select intercom first (as determined by
each extension’s setting for Automatic Line Selection).
See Chapter 2 for a review of the methods and buttons you can use while in
programming mode.
5-2
Overview