Filter
Top Products
Considerations
■
■
■
■
■
It is recommended that you use only one automated answering option for
incoming calls (either this feature, the Automated Attendant Service of the
voice messaging system, or a PARTNER Attendant).
Direct Extension Dial does not transfer calls to Calling Groups.
This feature can handle three outside calls simultaneously.
If you have lines programmed for Direct Extension Dial and Automatic
System Answer, Direct Extension Dial answers the call first.
A Direct Extension Dial button must be programmed on a button with lights
on the system display phone at extension 10. (This feature will not work if it
is programmed on a button without lights.)
Valid Entries
1 =
Assigned
2 = Not Assigned ✔
3 = Select button (then press a programmable button to assign Direct
Extension Dial to that button)
Programming
To assign or unassign a Direct Extension Dial button with lights at extension 10:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
1
] [
1
] [
3
].
2. If you want to assign Direct Extension Dial to the first available button, press
[
Next Data ] until a display similar to the following appears:
DXD Button
1 Assigned - Ext10
If you want to unassign Direct Extension Dial, press [ Next Data ] until a display
similar to the following appears:
DXD Button
2 Not Assigned
If you want to assign Direct Extension Dial to a specific button, press [ 3 ].
The display reads:
DXD Button
3 Select a Button
Then press a programmable button with lights to assign Direct Extension
Dial to that button.
3.
Select another procedure or exit programming mode.
4. Label the Direct Extension Dial button at extension 10.
5-60
Direct Extension Dial Button (#113)