Filter
Top Products
Programming
To identify the types of outgoing calls that can be made on all lines at an
extension:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
4
] [
0
] [
1
].
2.
At the
Extension:
prompt, enter the number of the extension to be
programmed. For example, to select extension 30, press [ 3 ] [ 0 ].
3. To change the type of call restriction, press [
Next Procedure
] until the appropriate
value displays.
4.
To program another extension, press [
Next Item
] or [
Prev Item
] until the extension
number shows on the display. Then repeat Step 3.
5.
Select another procedure or exit programming mode.
Outgoing Call Restriction (#401)
5-145