Filter
Top Products
Programming
To program a Wake Up Service button at extension 10:
1. Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
1
] [
1
] [
5
].
2.
At this point:
■
If you want to assign Wake Up Service to the first available button,
press [
Next Data
] until a display similar to the following appears:
Wake Up Service Button
1 Assigned - Ext10
■
If you want to remove the Wake Up Service button assignment, press
[
Next Data
] until a display similar to the following appears:
Wake Up Service Button
2 Not Assigned
■ If you want to assign Wake Up Service to a specific button, press [ 3 ]. A
display similar to the following appears:
Wake Up Service Button
3 Select a Button
Then press a programmable button with lights to assign Wake Up Service
to that button.
3.
Select another procedure or exit programming mode.
4.
Label the Wake Up Service button at extension 10.
Using
To schedule a wake up call for a specific extension:
1.
2.
3.
Press the Wake Up Service button at extension 10.
The green light next to the Wake Up Service button flutters. Wake Up
Service is activated and a display similar to the following appears:
Wake Up Call
Dial the two-digit extension number of the desired extension (or use an Auto
Dial button). For example, to schedule a wake up call for extension 32,
press [
3 ] [ 2 ]. A display similar to the following appears:
Wake Up Call 32 --:--
Enter the wake-up time in 24-hour notation. For example, to set the time to
2:15 p.m., press [
1
] [
4
] [
1
] [
5
]. When you have finished entering the time, a
display similar to the following appears:
Wake Up Call 32 14:15
The wake up call is scheduled, and the green light next to the Wake Up
Service button turns off.
Wake Up Service Button (#115) 5-205