Filter
Top Products
Considerations for Hunt Group 7
This Hunt Group is used exclusively for the extensions associated with the voice
messaging system hardware. Do not assign any other extensions to this group.
A voice messaging system requires special hardware and set up
procedures—refer to “Voice Messaging Systems” in Chapter 4 and to the
documentation shipped with the voice messaging system for more information.
Valid Entries
1 = Assigned to group
2 = Not Assigned to group ✔
Programming
To assign extensions to a Hunt Group:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
5
] [
0
] [
5
].
2.
At the Group: prompt, enter a group number (1–7). For example, to select
group 1, press [
1 ]. A display similar to the following appears:
Hunt Group 1
Extension:
3.
Enter the desired extension number. For example, to select extension 31,
press [
3
] [
1
].
4.
To assign or unassign the extension, press [
Next Data
] until the appropriate value
displays.
5.
At this point:
■
■
To assign or unassign another extension, press [
Next Item
] or [
Prev Item
]
until the extension number shows on the display. Then repeat Step 4.
To program another group, press [
Next Procedure
] [
Prev Procedure
], enter a
new group number, and repeat Steps 3 and 4.
6.
Select another procedure or exit programming mode.
5-110
Hunt Group Extensions (#505)