Filter
Top Products
Programming
To restrict an extension from making or receiving calls on all the lines in a
specific pool:
1.
2.
3.
4.
5.
6.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
3
] [
1
] [
5
].
Enter the number of the extension to be programmed. For example, to
program extension 23, press [
2 ] [ 3 ]. A display similar to the following
appears:
Pool Access Rstr 23
Pool:
Enter the pool number (880, 881, 882, or 883) to be restricted at this
extension. For example, to restrict pool 881, press [
8 ] [ 8 ] [ 1 ]. The current
restriction displays.
To change the pool restriction for this extension, press [
Next Data ] until the
appropriate value displays—see “Valid Entries” on the previous page.
At this point:
■
To restrict another pool at this extension, press [
Next Item
] or [
Prev Item
] until
the pool number shows on the display. Then repeat Step 4.
■
To restrict another extension, press [
Next Procedure
] [
Prev Procedure
] and
begin at Step 2.
Select another procedure or exit programming mode.
Pool Access Restriction (#315)
5-153