Filter
Top Products
Programming
To program a Night Service button at extension 10:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
5
] [
0
] [
3
].
2.
At this point:
■
■
■
■
■
■
■
If you want to assign Night Service to the first available button, press
[
Next Data
] until a display similar to the following appears:
Night Service Button
1 Assigned - Ext10
If you want to remove the Night Service button assignment, press
[
Next data
] until a display similar to the following appears:
Night Service Button
2 Not Assigned
If you want to assign Night Service to a specific button, press [
3 ]. A
display similar to the following appears:
Night Service Button
3 Select a Button
Then press a programmable button with lights to assign Night Service to
that button.
3.
Select another procedure or exit programming mode.
4.
Label the Night Service button at extension 10.
Using
To turn Night Service on:
1.
Press the Night Service button at extension 10.
If a System Password is programmed, the green light next to the button
flashes; you must continue with Step 2.
If no System Password is programmed, the green light is on steady and
Night Service is on.
2.
Enter the password.
The green light is on steady. Night Service is on.
To turn Night Service off:
1.
Press the Night Service button at extension 10.
If a System Password is programmed, the green light next to the button
flashes; you must continue with Step 2.
If no System Password is programmed, the green light goes out and
Night Service is off.
2. Enter the password.
The green light goes out. Night Service is off.
Night Service Button (#503)
5-141