Lucent Technologies 4.1 Marine Radio User Manual


 
Dial Mode (#201)
Description
This System Programming procedure identifies individual lines as touch-tone or
rotary. You should check with your local phone company if you are not sure
which type of line is being provided to you.
Related Features
If you are having difficulty using touch-tone phones on rotary lines, you may
need to adjust the Rotary Dialing Timeout (#108).
If the system has rotary lines, you can use Touch-Tone Enable to send
touch-tone signals over a rotary line (for example, to access bank-by-phone
services).
Valid Entries
1 = Touch-Tone line
2 = Rotary line
Programming
To change the Dial Mode setting for a specific line:
1.
2.
3.
4.
5.
6.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
2
] [
0
] [
1
].
Enter the first line to be programmed. For example, to program line 8, press
[
0
] [
8
].
To change the dial mode, press [ Next Data ] until the appropriate value displays.
To program another line, press [
Next Item
] or [
Prev Item
] until the line number
shows on the display. Then repeat Step 3.
Repeat Steps 3 and 4 for all lines that you want to change.
Select another procedure or exit programming mode.
5-58
Dial Mode (#201)