Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-21Programming from a PC with SPM
6
Console/Display Instructions Additional Information
If the PC does not have a hard disk, insert the SPM diskette into Drive A.
Type
and press .
appears on the screen.
Type
and press to display the SPM Welcome screen shown below.
Press any key to display the SPM Main Menu shown below.
■ If the SPM Main Menu does not appear or if the information about the
screen is garbled, press any key again.
■ If the COMM PORT (communications port) screen appears instead of the
SPM Main Menu, the SPM software has not been initialized. See Chapter 2
of
System Programming.
NOTE:
The function keys shown on either side of the display are included
here for quick reference. On the PC screen, the system
programming keys do not look like actual keys.
To reach the System Programming menu, select by pressing .
Perform the procedures in the task descriptions as outlined in this chapter.
= current version of SPM