Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-73Assigning Allowed Lists to Extensions
6
Program the change(s), following the instructions for “Allowed Lists” in the
“System Features” section of
System Programming
, Chapter 3, or the
summary programming instructions below.
When you have finished, file the forms with the rest of the planning forms.
Programming Instructions 6
Assigning Allowed Lists to Extensions 6
Use this procedure to assign individual extensions to established Allowed Lists.
Planning Guidelines 6
More than one Allowed List can be assigned to an extension.
NOTE:
You can copy calling restrictions. See “Copy Call Restrictions” in Chapter 3
of
System Programming
.
Valid Entries
0 to 7
Task List: Assigning Allowed Lists to Telephones 6
Obtain Form 6e, Allowed Lists and, as appropriate, the form(s) for
individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c.
If necessary, read “Allowed/Disallowed Lists” in the
Feature Reference
for
detailed information about this feature.
Plan changes using the planning guidelines above; record the new values
on the form(s).
Open the System Programming menu from the console or a PC with SPM.
Program the change(s), following the instructions for “Assign Allowed Lists
to Telephones” in the “System Features” section of
System Programming
,
Chapter 3, or the summary programming instructions below.
When you have finished, file the forms with the rest of the planning forms.
Console Procedure
→ →Dial list no. and entry no.→
→Drop→Dial no.→ →
PC Procedure → →Type list no. and entry no.→ →
+ →Type no.→ →