Lucent Technologies 6 Marine Radio User Manual


 
MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-60Adding a DLC Operator Position
6
NOTE:
This task requires an idle condition: Extension Forced Idle for this
extension jack.
Assign the jack, following the instructions for “DLC Operator Positions” in
the “System Operator Positions” section of
System Programming
, Chapter
3, or the summary programming instructions below.
NOTE:
This task requires an idle condition: System Idle.
Assign the lines/trunks, following the instructions for “Assign Trunks or
Pools to Telephones” in the “System Operator Positions” section in
System
Programming
, Chapter 3.
NOTE:
This task requires an idle condition: Extension Forced Idle for this
extension jack. Also, if you need additional SA or SA Originate Only
buttons, you should remove all lines using system programming,
then assign the buttons using centralized telephone programming.
For more information, see
System Programming
.
Using centralized telephone programming, assign Ringing Options as
described in Chapter 5, “Centralized Telephone Programming,” in
System
Programming
.
If you are adding a personal line, Loudspeaker Paging, or Pool buttons
(Hybrid/PBX only), assign the outside lines/trunks to the buttons on the
telephone following the instructions in “Assign Trunks or Pools to
Telephones” in the “Telephones” section of
System Programming
,
Chapter 3.
NOTE:
You may choose to copy line/trunk button assignments that other
extensions have, for example, a Loudspeaker Paging button. For
more information, see “Copy Line/Trunk Assignments” in the
“Telephones” section of
System Programming
, Chapter 3.
Assign intercom or system access buttons by following the instructions in
“Assign Intercom or System Access Buttons” in the “Telephones” section of
System Programming
, Chapter 3. Also, you may choose to use the Copy
Extension procedure described in “Copying Feature and SA/ICOM
Buttons” on page 6–29.
NOTE:
This task requires an idle condition: Extension Forced Idle.