Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-68Connecting Auxiliary Equipment
6
Valid Entries
Line/trunk numbers
For Voice Messaging System and Automated Attendant
The number of rings cannot be programmed for individual voice messaging
systems; the single setting applies for all. Use the Group Type procedure in
“Optional Group Features” (Chapter 3,
System Programming
) to assign VMI ports
as either integrated or generic.
Valid Entries
Touch-tone duration: 50 to 200 ms, in increments of 25 ms
Interval between digits: 50 to 200 ms, in increments of 25 ms
Number of rings before transfer: 0 to 9
Task List: Connecting Auxiliary Equipment 6
Obtain Form 2c, System Numbering: Line/Trunk Jacks, and the appropriate
individual telephone form (4d, 4e, 4f, 5b, or 5c). For a voice messaging
system or auto attendant system, see the forms packaged with the
application.
If necessary, read “Auxiliary Equipment” in
System Programming
, Chapter
4, for additional information.
Plan changes using the planning guidelines above; record the new values
on the form(s).
Open the System Programming menu from the console or a PC with SPM.
Program the change(s), following the appropriate instructions for “Auxiliary
Equipment” in
System Programming
, Chapter 4, or the appropriate
summary programming instructions below.
NOTE:
For Music On Hold and maintenance alarms, System Idle is
required; for loudspeaker paging, Line/Trunk Idle is required.
When you have finished, file the form(s) with the rest of the planning forms.