Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-40Adding an Extension
6
extension appears on the screen. Attempt the backup procedure again when the
busy extension becomes idle.
NOTE:
By default, the system is set to perform a backup automatically once a
week. You can change this to daily backups or to manual backups. For
more information, see “Automatic Backup” in the “Memory Card” section in
Chapter 3 of
System Programming
.
Default filenames in manual backups are automatically dated using the MMDD
convention with no slashes.
Task List: Backing Up the System 6
If necessary, read “Memory Card” in Chapter 3 of
System Programming
for
detailed information about this feature, including how to insert the memory
card into the PCMCIA interface slot on the processor module and
descriptions of the backup files.
Open the System Programming menu from the console or a PC with SPM.
Program the change(s), following the instructions for “Backup” in the
“Memory Card” section of
System Programming
, Chapter 3, or the
summary programming instructions below.
When you have finished, leave the Translation memory card in the
PCMCIA interface slot.
Programming Instructions 6
Adding an Extension 6
Use this procedure to add an extension to the system.
Console Procedure Insert memory card→
→ →
→Select backup file→Dial new backup
filename→
→ → → →
PC Procedure Insert memory card→ → → →Type ext. no.→
→ + →Type label→ → → →