Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Learning More
Page 7-6Guides
7
■ Multi-Function Module (MFM; a telephone adapter that affects and is
affected by system features)
■ Personal lines
■ Primary Rate Interface (PRI), NI-1 BRI, and T1 Switched 56 service
■ Programming
■ Queued Call Console (QCC)
■ System Renumbering (a programming procedure for changing extension
and/or line numbers)
■ Touch-Tone or Rotary Signaling (information about supporting the two
types of telephone signaling on the system)
■ Videoconferencing
Contents and Organization 7
The
Feature Reference
does not have chapters. Instead, each feature is a section
of the guide; the name of the feature explained in the section appears at the
bottom of each page.
Entries 7
Each entry in the guide explains a feature or set of features in great detail.
“At a Glance,” a boxed table at the beginning of each feature description,
summarizes the following aspects of the feature or feature group:
■ Users Affected. Shows what category of users is affected by a feature.
For example, “Auto Dial” lists telephone users and Direct-Line Console
(DLC) operators as those affected by the feature. (From this you can
conclude that Queued Call Console (QCC) operators
cannot
use Auto
Dial.)
■ Reports Affected. Cites the Station Message Detail Recording (SMDR)
reports in which you can find information relating to the feature.
■ Modes. Lists the system operating mode or modes in which the feature is
used.
■ Telephones. Tells you which telephones can use the feature.
■ Programming Code(s). As appropriate, lists the programming code(s)
used to program the feature on a button or to turn it on or off.
■ Feature Code(s). Lists the feature code(s) you can use to activate the
feature or turn it off.
■ MLX Display Label(s). Lists the name as it appears on the MLX-20L
and/or other MLX telephones.