Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-67Connecting Auxiliary Equipment
6
Because this procedure requires an idle system, you may want to perform it after
hours.
Valid Entries
Line/trunk numbers
For Loudspeaker Paging
If you use equipment that rebroadcasts music or other copyrighted materials, you
may be required to obtain a copyright license from and pay license fees to a third
party (such as the ASCAP or BMI). Magic on Hold requires no such license and
can be purchased from your Lucent Technologies representative.
A maximum of three single-zone or multizone loudspeaker paging systems can be
connected to the system.
You cannot assign the line/trunk identified for loudspeaker paging equipment use
to a line/trunk pool. If the line/trunk is currently assigned to a pool, you must
remove it before you program this option.
You cannot assign the line/trunk identified for loudspeaker paging equipment use
as a Remote Access line/trunk, and you cannot use its jack for Music On Hold or
maintenance alarm.
Valid Entries
Line/trunk numbers
For Fax Machines
A maximum of 16 fax machines can use the Fax Message Waiting feature.
Additional fax machines (more than 16) can be installed, but these machines
cannot use this feature.
NOTE:
Fax machines should not be connected to analog multiline telephones with
a General-Purpose Adapter (GPA). In a GPA configuration, features cannot
be assigned to the fax machine independently of the telephone.
You can specify up to four telephones to receive the message-waiting indication
when a fax transmission is received. Note that fax machines can only send and
not receive message-waiting indications.
Valid Entries
For the number of seconds: 0 to 30 seconds
For Maintenance Alarms
You cannot assign the line/trunk identified for the maintenance alarm to a button
on any telephone or as a Remote Access trunk, and you cannot use its line/trunk
jack to connect a loudspeaker paging system or Music On Hold.