MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-27Centralized Telephone Programming
6
■ If you program the wrong feature on a button, follow the steps below:
1. Press the button.
2. Select
(press on the PC).
3. Press the button again.
■ If you press a line button that is not active, the screen shown below
appears. Press Home to return to the Home screen.
■ You can use the Extension Information ( ) report option on the
Print menu (accessed from the System Programming menu) to print all of
the programmed features for a specific extension.
NOTES:
1. If you are programming buttons at an extension with an MLX-16DP,
MLX-5D, or MLX-5 telephone, keep the following in mind:
■ The system recognizes the MLX-16DP as an MLX-28D. If you are
replacing an MLX-28D with an MLX-16DP, remove all line and
feature button assignments from the extension
first.
This rule also
applies when you are replacing other telephones with an
MLX-16DP.
■ The System Programming Extension Information Report incorrectly
reports MLX-16DP telephones as MLX-28D telephones; keep a
separate log of the MLX-16DP telephones on your system.
■ In releases prior to 5.0, the system recognizes the MLX-5D as an
MLX-10D and the MLX-5 as an MLX-10. If you are replacing an
MLX-5D or an MLX-5 with an MLX-10D or an MLX-10, remove all
line and feature button assignments from the extension
first.
This
rule also applies when you are replacing other telephones with an
MLX-5 or MLX-5D.
■ In releases prior to 5.0, the System Programming Extension
Information Report incorrectly reports MLX-5D and MLX-5
telephones as MLX-10D and MLX-10 telephones respectively; keep
a separate log of the MLX-5D and MLX-5 telephones on your
system.