Filter
Top Products
92
Computer Link Operation Setting
3.7.2 E
2
PROM write selection (Pr. 342)
*When reset is performed, the parameter value will be the value of E
2
PROM.*
You can choose whether the parameters are stored into E
2
PROM or not at the
parameter setting for CC-Link or RS-485 communication.
Parameter Name
Factory
Setting
Setting
Range
342
E
2
PROM write selection
00, 1
Pr. 342 Setting Description
0
Written to RAM and E
2
PROM
1
Written to RAM only. Not written to E
2
PROM.*
REMARKS
When E
2
PROM write disable (setting value=1) is set in parameter, the set value is
returned to the original value (the value stored in E
2
PROM) by power on reset or terminal
reset.
Pr.503, Pr.504 Refer to page 143.
Pr.505 Refer to page 68.
Pr.506 Refer to page 69.
Pr.507 Refer to page 138.
Pr.510 to Pr. 529 Refer to page 135.
Pr. 530 to Pr. 532 Refer to page 136.
Pr.533 Refer to page 137.