Filter
Top Products
43
Monitor Transition
2
OPERATION AND CONTROL
2.3 Monitor Transition
2.4 Monitoring the Output Current
2.5 Displaying the CC-Link Data (Station Number,
Baudrate)
POINT
Hold down the key in the monitor mode to switch from the output current
to the frequency.
POINT
Hold down the key in the CC-Link display mode to switch from the station
number to the baudrate.
MODE
MODE
0:156kbps
1:625kbps
2:2.5Mbps
3:5Mbps
4:10Mbps
SET
Hold down key.
Power on
Return
Press MODE key.
Frequency monitor
CC-Link
station number
SET
Hold down key.
SET
Release key.
Press MODE key.
Current monitor
SET
Release key.
CC-Link
baudrate
display
SET
SET
2.
Whether the inverter is running, at a
stop or in any operation mode,
holding down the key displays
the output current.
SET
(1.0A)
3.
SET
Release the key to return to
the output frequency monitor mode.
Operation
Display
Hold down.
1.
MODE
Press the key to switch to
the output frequency monitor.
SET
SET
2.
Whether the inverter is running, at a
stop or in any operation mode,
holding down the key displays
the baudrate.
SET
Operation
1.
MODE
Press the key to switch to the
CC-Link station number display mode.
3.
SET
Release the key to return to
the CC-Link station number display.
Hold down.
Display