Filter
Top Products
140
System Configuration
5.1 System Configuration
5.1.1 System configuration example
(1) PLC side
Mount the "AJ61BT11", "A1SJ61BT11", "AJ61QBT11", "A1SJ61QBT11" or
"QJ61BT11" Control & Communication Link system master/local module on the
main base unit or extension base unit of the PLC CPU that will act as the master
station.
(2) Connect the PLC CC-Link module master station and inverters by CC-Link
dedicated cables.
5.1.2 Regarding CC-Link Ver. 1.10
This product is compatible with CC-Link Ver. 1.10.
For the Ver. 1.10 compatible cables, refer to the manual of the CC-Link master module.
REMARKS
1. Refer to the following manuals for the CC-Link master station.
• Control&Communication Link System Master/Local Module User's Manual... SH-080016
• Control&Communication Link System Master/Local Module type AJ61QBT11/
A1SJ61QBT11 User's Manual ... IB-66722
• Control&Communication Link System Master/Local Module type AJ61BT11/A1SJ61BT11
User's Manual ... IB-66721
2. Refer to page 36 for the CC-Link communication wiring and CC-Link cables.
CAUTION
In a system where the CC-Link Ver. 1.00 and Ver. 1.10 modules and cables are used
together, the maximum overall cable length and interstation cable length should
conform to the CC-Link Ver. 1.00 specifications.
CPU
AJ61
BT11
Master station
Power supply
module
Terminating
resistor
CC-Link dedicated cable
Terminating
resistor
Inverter
Inverter
Up to 42 inverters
can be connected
when only inverters
are connected.
Power supply
Motor Motor
Power
supply