Filter
Top Products
21
1
INSTALLATION AND WIRING
How to Use the Input Signals (Assigned Terminals
RL, RM, RH, STR, SQ)
1.9.6 Sequence start:
Pr. 60 to Pr. 63, Pr. 65, Pr. 505 setting
"50"
Used to execute/stop (RUN/STOP) the built-in PLC function.
Short SQ-SD to execute (RUN) and open SQ-SD to stop (STOP).
Refer to page 100 for details.
1.9.7 No function:
Pr. 60 to Pr. 63, Pr. 65, Pr. 505 setting
"9998"
Disables the input terminal functions.
1.9.8 Start (reverse rotation) signal:
Pr. 63 setting
"9999"
Turn the signal on or off to bring the motor to a reverse rotation start or stop.
(Refer to page 15 for details.)
REMARKS
Refer to page 127 for the no function setting of the external terminal inputs in device D9149
"inverter operation status control enable/disable setting".