Filter
Top Products
42
Parts Identification and Functions of the Operation
Panel
2.1 Parts Identification and Functions of the
Operation Panel
The operation panel cannot be removed from the inverter.
2.2 Operation Mode Switching
Using , switch between the "PU operation mode" and "external operation mode".
The PU indication is lit in the PU operation mode.
The EXT indication is lit in the external operation mode.
REMARKS
Operation mode switching that can be performed using is disabled if the Pr. 79 setting is
other than 0 (factory setting). (Refer to page 75.)
RUN
PU
EXT
MODE SET
RUN
PU
EXT
STOP
RESET
P.RUN
L.RUN
SD
RD
L.ERR
CC-Link
Monitoring 3-digit LED
Displays frequency,
parameter number, etc.
Used to switch between PU and
external operation modes. When
using external operation mode,
press this key to light up EXT
indication.
PU: PU operation mode
EXT: External operation mode
Run command forward rotation.
Set reverse rotation using Pr. 17.
Used to stop operation or reset
alarm.
Used to switch monitor or
display data.
Used to switch setting mode.
PU
EXT
PU
EXT
External
operation mode
PU
operation mode
PU
EXT