Filter
Top Products
55
List of Parameters Classified by Purpose of Use
3
INVERTER FUNCTIONS
3.2 List of Parameters Classified by Purpose of Use
Set the parameters according to the operating conditions. The following list
indicates purpose of use and corresponding parameters.
Purpose of Use
Parameter Numbers
Parameter numbers that must be set
Related to operation
Operation mode selection Pr.79
Acceleration/deceleration time
adjustment
Pr.7, Pr.8
Selection of output characteristics
optimum for load characteristics
Pr.3, Pr.71
Output frequency restriction (limit) Pr.1, Pr.2
Operation over 60Hz Pr.1
Motor output torque adjustment Pr.0
Brake operation adjustment Pr.10 to Pr.12
Multi-speed operation Pr.1, Pr.2, Pr.4 to Pr.6
Related to application
operation
Electromagnetic brake operation timing Pr.64, Pr.506
CC-Link communication Pr.338 to Pr.340, Pr.503, Pr.504
Operation in communication with
personal computer
Pr.331 to Pr.337, Pr.341, Pr.342
Noise reduction Pr.72
Related to
monitoring
Display of monitor on operation panel or
parameter unit (FR-PU04)
Pr.52, Pr.992
Related to incorrect
operation prevention
Inverter parameter rewrite prevention Pr.77
Motor stall prevention Pr.21, Pr.22
Other
Input terminal function assignment Pr.60 to Pr.63, Pr.65, Pr.505
Output terminal function assignment Pr.64, Pr.506
Increased cooling fan life Pr.76
Motor protection from overheat Pr.9, Pr.71
Setting of ground fault overcurrent
protection
Pr.40
Inverter reset selection Pr.75