Filter
Top Products
135
4
PROTECTIVE FUNCTIONS
Check and clear of the faults history
(2) Clearing procedure
POINT
Set Er.CL Fault history clear = "1" to clear the faults history.
Operation
1.
Screen at power-ON
The monitor display appears.
2.Press to choose the parameter
setting mode.
3.Turn until (faults history clear)
appears.
4.Press to read the currently set value.
" "(initial value) appears.
5.Turn to change it to the
setting value " ".
6.Press to set.
· Press to show the setting again.
· Press twice to show the next parameter.
· Press to read another parameter.
Display
The parameter
number previously
read appears.
Flicker ··· Faults history clear complete!!
HC2.book 135 ページ ２０１２年１１月１９日 月曜日 午前１０時５２分