Filter
Top Products
129
User-set Allocations Section 5-3
• Slave User Allocations Table
• Slave areas
Step 1: Turn ON the Slave User Allocations Switch
Make sure that slave communications have stopped prior to performing this
operation. Turn ON the Slave User Allocations Switch (word n+1, bit 11:
CIO 150111 in this example). This will allocate the above areas as slave
areas and the DeviceNet Unit will start slave remote I/O communications.
Step 2: Turn ON the Slave Enable Switch
Turn ON the Slave Enable Switch (word n+1, bit 06: CIO 150106 in this exam-
ple). This will allocate the above areas as slave areas and the DeviceNet Unit
will start slave remote I/O communications.
OUT block 1 area : WR (04 Hex)
First word of OUT block 1: 50 (0032 Hex)
OUT block 1 size: 20 bytes (14 Hex, 10 words)
IN block 1 area : WR (04 Hex)
First word of IN block 1: 100 (0064 Hex)
IN block 1 size: 10 bytes (0A Hex, 5 words)
OUT area 1
IN area 1
to