Filter
Top Products
267
Revision History
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code Date Revised content
1 October 2000 Original production
2 July 2001 Major revisions to add the CJ-series DeviceNet Unit. “CS1” was changed to “CS” or “CS/CJ” as appro-
priate and the following changes were made. Other changes are as follows:
Page ix: Manual contents updated and manuals added to table.
Page xiv: Precaution added on providing double safety mechanisms.
Page xv: EMC standards updated.
Page xvi: Impedances, manufacturer, and dimensions changed.
Page 2: Changed to “DeviceNet Unit” to clarify meaning.
Page 3: Corrected callout at upper right of page.
Pages 8 and 25: Number of node for FINS communications changed.
Pages 8, 16, 17, 18, 19: Notes added.
Pages 10, 11, 15: Products added.
Page 15: OS updated in table.
Page 16: Graphics changed.
Page 17: Bottom graphic and description changed.
Page 31: Routing table item added to table.
Page 33: Maximum words per slave item added to table.
Page 34: Corrected CIO 3770 number.
Page 36, 37: Added PCI Board info to graphic and tables.
Page 39: Note added.
Page 41: Routing table section added.
Pages 42, 43, 44: Slight change in procedure.
Page 48: Graphic added.
Pages 48, 49, 50: Information added from previous sections 8-2, 8-3, and graphics changed.
Page 51: Graphics changed.
Page 52: Note added, graphic added.
Page 55: CJ-series explanation added.
Page 56: Graphic added.
Page 60: Information added to Software Switches 1 description.
Pages 62, 63, 64, 65: Table items added.
Page 95: Address numbers changed in graphic.
Page 101: Note in item 7 corrected (Right changed to Left).
Page 101: Same note in item 6 corrected (Right changed to Left).
Page 102: Note 2 added concerning Configurator Ver. 2.10.
Page 105: Change made to Step 2 of 4-3-2, and Step 3 added.
Page 107: Table changed.
Page 109: Allocation tables changed.
Page 114: Changes made to Changing System Components section.
Page 118: Note added concerning Configurator Ver. 2.10.
Page 119: Changes made to 4-5-1.
Page 119: Changes made to 4-5-2.
Page 120: Note added.
Page 127: Note 2 added concerning Configurator Ver. 2.10.
Page 133: Note 2 added concerning Configurator Ver. 2.10.
Page 140: Explanation of node address 0 added to table.
Page 142: Revision made to note in section 6-1-6.
Pages 146, 147, 148, 149: Sections 6-3 to 6-3-2 newly added.
Pages 157, 158: Section 6-4 moved from previous location in section 6-6.
Page 160: Note content changed.
Page 174: Reference to manual changed in Note.
Pages 181, 182, 183, 184, 185: Sections 7-1 to 7-1-4 newly added.
Pages 185, 186, 187: Sections 7-2 to 7-2-2 moved from Appendix.
Page 193: PC cycle time delay calculation in two Notes changed from 0.25 ms + 1.5 ms to 0.7 ms.
Page 194: Table item changed from (TPC-TRF) to (TPC+TRF).
Page 197: PC cycle time delay calculation changed from 0.25 ms + 1.5 ms to 0.7 ms.
Page 200: Information from previous sections 8-2, 8-3 moved to pages 48, 49, 50.
Page 222: Reference to Slaves Operation Manual changed.
Page 225: Reference to Slaves Operation Manual changed.
Page 225: DNnnBKUP.DAT changed to DNnnBKUP.dvf in Note 3.
Page 232: Note added.
Cat. No. W380-E1-2
Revision code