Filter
Top Products
147
Using FINS Message Communications Section 6-3
The unit number of the DeviceNet Unit as a CPU Bus Unit is the number set
on the rotary switches on the front panel (0 to 15). The network address is the
address of the Network to which the CPU Bus Unit is connected (1 to 127).
The network address is specified when this local network table for the routing
table is created.
Relay Network Tables Relay network tables show the destination network (final network) and the
network and node address of the first relay point on the way to that network
(the first point to which communications are sent). The relay points are fol-
lowed on the way to the final network.
Final network address: The address of the final network (1 to 127).
Relay network address: The address of the network to which the first relay
point belongs (1 to 127).
Relay node address: The node address of the first relay point.
Procedure for Creating the Routing Table
Use the CX-Net function for creating/sending routing tables in the CX-Pro-
grammer, with the following procedure.
1. Select Start/Program/Omron/CX-Server/CX-Net Network Configura-
tion Tool to start the CX-Net.
2. Select Edit/FINS Local from the Routing Table Menu. The following PC
Routing Table Window will appear.
3. Click on the Table View Tab. A table like that shown below will appear.
201
302
Address of local
network
CPU Bus Unit’s
unit number
Final Network Address Relay Network Address Relay Node Address