Filter
Top Products
4
Overview of DeviceNet Section 1-1
Configurator Features
• Enables user-set allocations for remote I/O (choice of node address order,
2 area allocations, etc.).
• Enables serial connection to the Programming Device Port of a PC.
• Enables user settings for DeviceNet remote I/O communications connec-
tions.
• Enables multiple Masters on a single PC.
• Enables multiple Masters in a single network.
Slave Features
I/O Terminals
• Provide general-purpose I/O via terminal blocks (M3).
• Available in the following models:
• 8-point Transistor Input Terminal
• 16-point Transistor Input Terminal
• 8-point Transistor Output Terminal
• 16-point Transistor Output Terminal
Environment-resistant Terminals
• Improved I/O Terminals that conform to IP66 for spatter-, water-, and oil-
resistance.
• Available in the following models:
• 8-point Transistor Input Terminal
• 8-point Transistor Output Terminal
• 16-point Transistor I/O Terminal (8 inputs and 8 outputs)
Remote Adapters
• Used in combination with G70D and other I/O Blocks to handle relay out-
puts, power MOS FET Relay outputs, etc.
• Available in 16-point input and 16-point output models.
I/O Link Units
• More than one I/O Link Unit can be mounted to a CQM1 PC.
• Link 16 inputs and 16 outputs between the PC and the Master.
Sensor Terminals
• Accept inputs from photoelectric and proximity sensors with connectors.
• Available in 16-point input and 8-point input/8-point output models.
• Output signals can be used for sensor teaching and external diagnosis.
Analog Input Terminals
• Convert analog inputs to binary.
• Switchable between 2 and 4 input points using the DIP switch.
• Handle inputs of 0 to 5 V, 1 to 5 V, 0 to 10 V, –10 to +10 V, 0 to 20 mA, or
4to20mA.
Analog Output Terminals
• Convert binary data to analog outputs.
• Provides outputs of 1 to 5 V, 0 to 10 V, –10 to +10 V, 0 to 20 mA, or 4 to
20mA.
• Available in models with a resolution of either 1/6,000 or 1/30,000.