Filter
Top Products
18
DeviceNet Unit Features Section 1-2
CX-Programmer
Programming and
Monitoring of DeviceNet
Slave PCs (Ver. 2.1 or
Later)
CX-Programmer Ver. 2.1 connected to a serial communications port on a
DeviceNet PC can be used to remotely program and monitor other DeviceNet
PCs (i.e., PCs with a CS/CJ-series DeviceNet Unit or a Programmable Slave).
Note Refer to 7-1 Connecting to the CX-Programmer via the DeviceNet for details.
Inter-network Connections FINS messages can be sent back and forth between DeviceNet and other
networks (e.g., Controller Link, SYSMAC LINK, and Ethernet). This feature
enables seamless message communications between all types of networks,
including DeviceNet.
Note Refer to 6-3 Using FINS Message Communications for details.
CX-Programmer
DeviceNet
CX-Programmer
DeviceNet
Ethernet
CS/CJ-series DeviceNet
Unit (master)
CS/CJ-series DeviceNet
Unit (master)
CS/CJ-series DeviceNet
Unit (master)
CS/CJ-series DeviceNet
Unit (master)
Program-
mable
Slave
Program-
mable
Slave
Serial line (Host Link
or peripheral bus)
CS/CJ-series
Ethernet Unit
Controller Link Unit
Controller Link Unit
CS/CJ-series DeviceNet Unit
FINS message
Controller Link
DeviceNet
CS/CJ-series
DeviceNet Unit