Filter
Top Products
54
Installing the DeviceNet Unit Section 2-2
• Provide separate conduits or ducts for the I/O lines to prevent noise from
high-tension lines or power lines.
• Leave the label attached to the Unit when wiring. Removing the label may
result in malfunction if foreign matter enters the Unit.
• Remove the label after the completion of wiring to ensure proper heat dis-
sipation. Leaving the label attached may result in malfunction.
CS1W-DRM21
CJ1W-DRM21
Remove the label after wiring.
1
12
3
4
2
3
4
HOLD
ESTP
DR1
DR0
MS
ON
Remove the label after wiring.