Filter
Top Products
94
Reference Manual
IP2048/RM, Rev AA
Appendix F: Configuring Using HART
February 2015
F.2.5 Auto tank map
The transmitter can automatically map up to four echoes from false targets within an empty
tank. The tank needs to be empty so that echoes from all false targets are exposed.
Note
Set the Bottom Reference (page 105) before using Auto Tank Map.
Field Communicator
To automatically map up to four echoes from false targets:
1. From the Home screen, select 2: Configure.
2. Select 2: Manual Setup.
3. Select 6: False Echoes (MSP900GH)
or 7: False Echoes (MSP400RH).
4. Select 7: Auto Tank Map.
5. Wait while the transmitter learns about the empty tank to ignore the false echoes.
This process takes less than one minute.
Note
When messages appear, take appropriate action if needed and press “OK”.
Mobrey MCU900 Series control unit
To automatically map up to four echoes from false targets:
1. From the Main Menu screen, select SETUP.
2. Select the transmitter (e.g. “Tx1:MSP400RH”).
3. Select ENGINEERING, and then FALSE ECHO ACTION.
4. Select Auto Tank Map.
5. Follow the on-screen instruction (“start”) to ignore a false echo.
(Press the Enter key if prompted to change the mode to “off-line”).
6. Wait while the transmitter learns about the empty tank to ignore the false echoes.
The process takes less than one minute.
7. Select “Quit” to exit to the previous menu.
Note
See Clear False Echoes on page 143 for how to clear all learned false echoes.
See False Echo Data on page 142 for how to edit existing false echo data.
Use the “Learn False Echo” feature manual learning (page 93).
Fast Keys
2, 2, 6 [or 7], 7
False Echoes
1. Number of False Echoes
2. Distance D910
3. Echo Size D911
4. Target Echoes D913
5. Clear False Echoes
6. Learn False Echo
7. Auto Tank Map
8. False Echo Data
7. Auto Tank Map
SAVE
HOME
HELP
0
10.674 ft
75 %
5
(Field Communicator Screen)
Esc=Quit =Start
AUTO TANK MAP
(Mobrey MCU901 Screen)