Filter
Top Products
165
Reference Manual
IP2048/RM, Rev AA
Appendix F: Configuring Using HART
February 2015
F.4.20 Manufacturer (D960)
Field Communicator
To view the manufacturer name:
1. From the Home screen, select 2: Configure.
2. Select 2: Manual Setup.
3. Select 4: HART/Identity (MSP900GH)
or 5: HART/Identity (MSP400RH).
4. Select 1: Identity, and then 4: Manufacturer D960.
5. When finished, press EXIT to exit to the previous menu.
Mobrey MCU900 Series control unit
To view the manufacturer name:
1. From the Main Menu screen, select SETUP.
2. Select the transmitter (e.g. “Tx1:MSP400RH”).
3. Select SYSTEM, FIXED, HART, and then Manufacturer.
4. When finished, press the ESC key to exit to the previous menu.
F.4.21 Unique device ID (D961)
This is a factory set unique device identification number and is used by the HART protocol. It is
typically the same as the Serial Number (page 104).
Field Communicator
To view the device identification number:
1. From the Home screen, select 2: Configure.
2. Select 2: Manual Setup.
3. Select 4: HART/Identity (MSP900GH)
or 5: HART/Identity (MSP400RH).
4. Select 1: Identity, and then 7: Device ID D961.
5. When finished, press EXIT to exit to the previous menu.
Fast Keys
2, 2, 4 [or 5], 1, 4
Fast Keys
2, 2, 4 [or 5], 1, 7
Manufacturer D960
Mobrey
EXIT
HELP
(Field Communicator Screen)
Manufacturer D960
Mobrey
(Mobrey MCU901 Screen)
Device ID D961
123456
EXIT
HELP
(Field Communicator Screen)