Filter
Top Products
123
Reference Manual
IP2048/RM, Rev AA
Appendix F: Configuring Using HART
February 2015
Field Communicator
To view or change the diameter, maximum height,
or power factor:
1. From the Home screen, select 2: Configure.
2. Select 2: Manual Setup.
3. Select 3: Profiling.
4. Select 5: Non-Linear Profile Height P014
or 5: Power Factor P014 depending on the Non-Linear Profile selected (see page 107).
5. If a change is required:
(a) Input a new value, and press “ENTER” to save it.
(b) Press “SEND” to update the transmitter.
Mobrey MCU900 Series control unit
To view or change the diameter, maximum height,
or power factor:
1. From the Main Menu screen, select SETUP.
2. Select the transmitter (e.g. “Tx1:MSP400RH”).
3. Select DUTY.
4. Select Profile Height.
5. Follow the on-screen instructions to edit and save the new setting.
(Press the Enter ( ) key if prompted to change mode to “off-line”).
6. Select “Quit” to exit to the previous menu.
Non-Linear Profile Height P014
1 ft
1
ESC
DEL ENTER
HELP
w
s
q
a
z
Lock
Shift
@ &
á ü
x
e
d
c
r
f
v
t
g
b
y
h
n
u
j
m
*
-
+
/
.
0
7
4
1
8
5
2
9
6
3
i
k
o
l
FN
(Field Communicator Screen)
Profile Height P014
1.0000ft
Esc=Quit =Edit
(Mobrey MCU901 Screen)