Filter
Top Products
148
Reference Manual
IP2048/RM, Rev AA
Appendix F: Configuring Using HART
February 2015
F.4.2 Level / Secondary variable (SV) (D901)
This indicates the live level measured by the transmitter. In HART terminology, SV is the
Secondary Variable. Units are in metres, feet, or inches depending on base units (see page 90).
Note
Figure F-1 on page 106 shows this parameter in a tank geometry illustration.
Field Communicator
To view the live level measurement:
1. From the Home screen, select 1: Overview.
2. Select 2: Primary Purpose Variables.
3. Select 2: Level (SV) D901.
4. When finished, press EXIT to exit to the previous menu.
Note
SV is also at the Fast Key sequence 3, 2, 1, 2 (see Appendix E: Field Communicator).
Mobrey MCU900 Series control unit
To view the live level measurement:
1. From the Main Menu screen, select MONITOR.
2. Select the transmitter (e.g. “Tx1:MSP400RH”).
3. Select READINGS, and then select VARIABLES.
4. Select Level (SV).
5. When finished, press the ESC key to exit to the previous menu.
Fast Keys
1, 2, 2
Level (SV) D901
36.540 ft
EXIT
HELP
(Field Communicator Screen)
Level (SV) D901
9.3104ft
(Mobrey MCU901 Screen)