Filter
Top Products
72
Reference Manual
IP2048/RM, Rev AA
Appendix B: Product Certifications
February 2015
B.3 European directive information
A copy of the EC declaration of conformity certificate for the transmitters may be obtained by
contacting your local sales office.
ATEX directive (94/9/EC)
The MSP900GH complies with the ATEX directive
Pressure equipment directive (PED) (97/23/EC)
The Mobrey MSP400RH and MSP900GH are outside the scope of the PED Directive
Electro magnetic compatibility (EMC) (2004/108/EC)
EN 61326-1:2006, EN 61326-2.3:2006
B.4 Ordinary locations certification
(MSP400RH only)
Note
Refer to the housing label to identify the approvals for your transmitter.
B.4.1 American certification
Factory Mutual (FM) ordinary location approval
The transmitter has been examined and tested to determine that the design meets basic
electrical, mechanical, and fire protection requirements by FM, a nationally recognized testing
laboratory (NRTL) as accredited by the Federal Occupational Safety and Health Administration
(OSHA).
B.5 Hazardous locations certifications
(MSP900GH only)
Note
Transmitters that have the following labels attached have been certified to comply with
the requirements of the approval agencies noted.
B.5.1 European certification
ATEX intrinsically safe approval (MSP900GH only)
Certificate number: Sira 02ATEX2405X
II 1 G
Ex ia IIC T6 Ga (T
a
= –40 to 55 °C)
Ex ia IIC T4 Ga (T
a
= –40 to 60 °C)
Ui = 30 V, li = 120 mA, Pi = 0.82 W, Li = 108 H, Ci = 0 F