Filter
Top Products
Reference Manual
IP2048/RM, Rev AA
Appendix D: Mobrey MCU900 Series
February 2015
81
Appendix C: Mobrey MCU900 Series control unit
Appendix D Mobrey MCU900 Series
D.1 Introduction
The MSP400RH and MSP900GH can be used with the Mobrey MCU900 Series control unit. This
control unit supplies the 24 Vdc loop-power to the transmitter, and provides control
functionality using the 4–20 mA signal from the transmitter.
The control unit has HART communications capability, and access to all of the parameters of the
transmitter as shown in Table D-1 on page 82.