Filter
Top Products
159
Reference Manual
IP2048/RM, Rev AA
Appendix F: Configuring Using HART
February 2015
F.4.13 Frequency (D916)
This indicates the transmitter’s actual operating frequency.
The factory default setting is to automatically set the operating frequency for optimum
performance (see Target Frequency on page 140).
Field Communicator
To view the actual operating frequency:
1. From the Home screen, select 3: Service Tools.
2. Select 1: Alerts.
3. Select 2: Diagnostic Data.
4. Select 3: Operation.
5. Select 1: Transducer Frequency D916.
6. When finished, press EXIT to exit to the previous menu.
Note
This is also at the Fast Key sequence 2, 2, 7 [or 8], 6, 2
(see Appendix E: Field Communicator).
Mobrey MCU900 Series control unit
To view the actual operating frequency:
1. From the Main Menu screen, select MONITOR.
2. Select the transmitter (e.g. “Tx1:MSP400RH”).
3. Select DIAGNOSTICS.
4. Select OPERATION.
5. Select Xducer Freq.
6. When finished, press the ESC key to exit to the previous menu.
Fast Keys
3, 1, 2, 3, 1
Transducer Frequency D916
51 kHz
EXIT
HELP
(Field Communicator Screen)
Xducer Freq D916
51kHz
(Mobrey MCU901 Screen)