Filter
Top Products
164
Reference Manual
IP2048/RM, Rev AA
Appendix F: Configuring Using HART
February 2015
Mobrey MCU900 Series control unit
To view the hardware revision number:
1. From the Main Menu screen, select SETUP.
2. Select the transmitter (e.g. “Tx1:MSP400RH”).
3. Select SYSTEM, FIXED, HART, and then Hardware Rev.
4. When finished, press the ESC key to exit to the previous menu.
F.4.19 Software revision (D953)
This is the embedded software revision number at time of manufacture.
Field Communicator
To view the software revision number:
1. From the Home screen, select 1: Overview.
2. Select 3: Shortcuts.
3. Select 1: Device Information (twice).
4. Select 1: Identification.
5. Select 6: Software Revision D953.
6. When finished, press EXIT to exit to the previous menu.
Mobrey MCU900 Series control unit
To view the software revision number:
1. From the Main Menu screen, select SETUP.
2. Select the transmitter (e.g. “Tx1:MSP400RH”).
3. Select SYSTEM, FIXED, HART, and then Software Rev.
4. When finished, press the ESC key to exit to the previous menu.
Fast Keys
1, 3, 1, 1, 1, 6
Hardware Rev D952
1.0
(Mobrey MCU901 Screen)
Software Revision D953
33
EXIT
HELP
(Field Communicator Screen)
Software Rev D953
3.3
(Mobrey MCU901 Screen)