Filter
Top Products
61
Reference Manual
IP2048/RM, Rev AA
Section 5: Service and Troubleshooting
February 2015
6. Press the blue button to confirm the selected base units. (The flashing stops).
7. If the new setting is correct, press the red button
to save.
(The transmitter automatically re-starts as if it was a new instrument on first power-up).
8. If the new setting is incorrect, press the blue button
to exit to the menu.
9. The menu option “b.unit” re-appears to re-start at step (2), or press
to exit the
“Eng” menu and then the blue button
to change to the PV display.